 Brake system oil leakage is covered under a 10 year warranty; however, the oil seal nust be replaced every 3 year. Cailper with dust cover is warranted against deformation or cracking. |
- SPORT HOLLOW CALIPER 286X26MM
- SPORT HOLLOW CALIPER 303X28MM
- SPORT HOLLOW CALIPER 330X32MM
- SPORT HOLLOW CALIPER 355X32MM
- SPORT HOLLOW CALIPER 380X32MM
- SPORT HOLLOW CALIPER 400X36MM
- SPORT HOLLOW CALIPER 420X36MM
- F 286MM-15” RIM
-4POT - R 286MM-15”RIM
-2POT - F 303MM-16”RIM
-4POT - R 303MM-16”RIM
-2POT - F 330MM-17”RIM
-6POT - R 330MM-17”RIM
-4POT - F 355MM-18”RIM
-6POT - R 355MM-18”RIM
-4POT - F 380MM-19”RIM
-8POT - R 380MM-19”RIM
-6POT - F 400MM-20”RIM
-8POT - F 420MM-21”RIM
-8POT - F 444MM-22”RIM
-12POT - CALIPER STRENGTH TEST
- R 330-355MM-4POT
PATENT HANDBRAKE - R286-304MM-2POT
PATENT HANDBRAKE - EPB HOLLOW CALIPER
- DUAL FUEL CALIPER
- REAR ENLARGED DISC KIT
- FLOATING CALIPER
- HOLLOW RACING CALIPER
- SPECIAL COLORS
FOR OPTIONS - POLISH FORGED CALIPER
- CARBON DISC
- LIGHTWEIGH CENTER BELL
- TWIN COLOR CENTER BELL
- MEASUREMENT DIAGRAM
MEASUREMENT DIAGRAM
Since wheel sizes and specifications vary across different vehicle models, we provide a dedicated brake measurement specification sheet to ensure perfect compatibility with your car.
Customers can use the provided measurement guidelines to verify key dimensions such as mounting clearance, rotor, and caliper tolerances, helping you quickly determine if the product fits your wheel setup.
For further assistance or customized recommendations, please feel free to contact us.
Customers can use the provided measurement guidelines to verify key dimensions such as mounting clearance, rotor, and caliper tolerances, helping you quickly determine if the product fits your wheel setup.
For further assistance or customized recommendations, please feel free to contact us.
Step 1 
Download the drawing that you need and stick it to a thicker paper. Please make sure the data on the drawing are correspondent to the real sizes.
Step 2 
Follow the dotted lines and cut off the drawing.
Step 3 
Check if the edge of the caliper will conflict with the wheel. We suggest you to leave at least 2mm between the caliper and the wheel.
Step 4 
Put the drawing into the wheel as the picture shows. If there is a hub centric ring for the wheel, it is necessary to put it back to the center bore.
